Products
Your location:home page > Products > Secondary protection test equipment series > VS-GJB910 Optical digital relay protection tester

VS-GJB910 Optical Digital Relay Protection Tester

Tel:0086+400-996-1868

■ Technical parameters

▲ Optical fiber Ethernet port

       8 pairs ×100/1000M, LC, multimode, 1310nm or 850nm

       Support protocol: IEC61850-9-1/2/LE, Goose, MMS, IEEE-1588

       Transmission dispersion: <0.1μs

       Receiving time mark accuracy: <25ns

       1588 Time synchronization accuracy: <80ns

▲ Optical fiber serial port

       4 pairs × (2~20Mbits/s), ST, multimode, 850nm

       Support agreement: IEC60044-7/8 FT3

       Transmission mode: Man code, asynchronous serial port

▲ Transmission dispersion <0.1μs

▲ Receiving time stamp accuracy <25ns

▲ Synchronous interface

       Built-in GPS/Beidou dual-mode time synchronization module, external GPS antenna

       1 pair ×IRIG-B/PPS optical port, ST, multi-mode, 850nm

       Time synchronization accuracy: <1μs

▲ Two electrical Ethernet ports, RJ-45, 100/1000M, for external connection with PC and MMS

▲ Small signal output 12×(0~7.07VAC/0~10VDC), 4~20mA output type can be customized, resolution: 25μV

▲ Amplitude accuracy

       ±0.05%

       Phase accuracy: ±0.05°

       Frequency accuracy: ±0.001Hz

▲ 8 switch input, 10-250VDC or empty contact, automatic identification, no polarity

▲ Switch output

       8 channels, 4 empty contacts /4 fast out

       AC and DC breaking capacity: 0.5A, 250V

       Quick response time: <10μs

▲ Screen

       10.4’Multi-touch capacitive screen

       Resolution: 1024×768

▲ Power supply AC: 220V±15%, 50Hz±10Hz

▲ Dimensions 380mm×130mm ×300mm


  • Mobile browsing

    Mobile browsing

  • Wechat attention

    Wechat attention

HomeTelProduct