■ functional features

▲ 7-inch dot matrix Chinese LCD (can be equipped with touch screen), humanized design interface and one button operation.

▲ the unique split and non split capillary injection system (including diaphragm purging) ensures the stability and accuracy of samples.

▲ data power-off protection function, the operation data set by the instrument can be stored for a long time after power-off.

▲ with overtemperature protection device, if the temperature exceeds the setting, the instrument will stop heating and report the fault on the display.

▲ the design of the instrument is reasonable and flexible. Three detectors can be installed at the same time, and there are independent circuit system and signal output terminal.

▲ flexible packed column and capillary column system, which can be connected to capillary columns with different diameters.

▲ automatic rear door opening design ensures rapid cooling.

▲ high power and low noise rotating fan to ensure the uniformity of temperature.

■ technical parameters

▲ column box: 8 ℃ ~ 420 ℃ at room temperature, accuracy ± 0.05 ℃ (measured at 200 ℃)

▲ sample injector: 8 ℃ ~ 420 ℃ at room temperature, accuracy ± 0.05 ℃ (measured at 200 ℃)

▲ detector: 8 ℃ ~ 420 ℃ at room temperature, accuracy ± 0.05 ℃ (measured at 200 ℃)

▲ applicable to the installation of six channel temperature control furnace, etc

▲ temperature control accuracy: 8 ℃ ~ 420 ℃ at room temperature, accuracy ± 0.1 ℃

▲ volume of column incubator: 280mm × 300mm × 250mm

▲ temperature programmed order: eighth order. (21 steps can be added)

▲ programmed heating rate: 1 ℃ ~ 50 ℃

▲ constant temperature holding time of each stage: 0 ~ 300min (1min increment)

■ gas circuit system

▲ the carrier gas flow adopts the dual stable design of stabilizing pressure first and then stabilizing flow

▲ accurate graduated air circuit control valve with high reproducibility and stability

■ injection method

▲ filling column head injection

▲ packed column gasification injection

▲ capillary split / non split injection: back pressure valve control technology, linear split

▲ six way valve gas injection