■ Product Overview

VS-2080 overhead line small current grounding fault locator is suitable for single-phase metallic grounding, arc grounding, transit resistance grounding and other fault types; Ultra low frequency signal can avoid the influence of system capacitance, and can adapt to faults from low resistance to high resistance; Whether the line has branches, whether it is overhead line branches or cable branches, and whether the transformer is connected to the line has no impact on the equipment.

Fault location is carried out after the line is out of service due to fault. The transmitter applies high voltage to the fault line to reproduce the fault. The ultra-low frequency current flows from the transmitter to the fault point, enters the earth through the transition resistance and flows back to the transmitter; Along the line, the sensor is connected to the line through the insulating rod to detect the current, and the analog signal is converted into digital signal and transmitted outward through wireless mode. The receiver on the ground receives the wireless signal sent by the sensor and visually displays the measurement results on the LCD screen.

■ technical parameters

▲ purpose: finding and locating small current grounding fault of 6-35kV overhead line

▲ usage scenario: shutdown after grounding fault of the line

▲ the transmitter has high voltage, high power, stable current and can detect high resistance fault

▲ ultra low frequency signal overcomes the influence of system distributed capacitance and can locate high resistance fault

▲ high sensitivity opening sensor, no need to close, convenient for line hanging

▲ sensor receiver wireless communication

▲ numerical value / waveform display, clear and intuitive criteria

▲ positioning accuracy: 0.1M

▲ transmitter output characteristics: 1Hz, 0 ~ 8Kv, 0 ~ 100mA, 1000W (max)

▲ measurable line length: ≥ 100km

▲ wireless communication distance between sensor and receiver: > 100m

▲ transmitter: 417 × two hundred and thirty-four × 318mm，16kg，AC220V

▲ sensor: 180 × one hundred × 35mm, 0.45kg, 3 No. 7 batteries

▲ receiver 205 × one hundred × 35mm, 0.45kg, 5 No. 5 batteries