■ functional features

▲ the multifunctional aerial wiring clamp is easy to operate. Use the operating lever to hang and clamp the upper jaw of the wiring pliers at the position where wiring is required. Push and pull the operating lever to open and close the jaw freely and complete the wiring work. The opening size of the wiring clamp is large (80mm), and it is equipped with a guiding mechanism, which is very convenient to hang the clamp.

▲ high clamping force. The labor-saving principle of moving pulley is used between the upper and lower jaws of the wiring clamp, so a larger clamping force can be obtained by using a smaller tensile force.

▲ clamp force locking and release device is set inside the wiring clamp. When the operating lever is pulled, the elastic energy storage device in the tong can automatically lock the jaw at any required force. If the operating lever is not pushed, the self-locking device will never open by itself, and the performance is reliable. When the operating lever is pushed, the release device in the clamp can open the clamped jaw, which is very convenient to operate.

▲ good contact. The jaw part is equipped with a steel needle. While clamping, the wiring clamp has the function of overcoming oxide film, ensuring good contact between the jaw and the wiring position.

▲ the short-time energizing current is greater than 100A.

▲ strong practicability. The angle of the clamp head of the wiring clamp can be changed, which can complete the testing or maintenance of grounding wiring with different angles, different thicknesses, different diameters and heights below 8m.

▲ small weight and light use. Reasonable structural design, excellent texture and durability, and the weight of tong head is 650g.

■ technical parameters

▲ specification: 8M

▲ box size: 152cm × 27cm × 11cm

▲ tong head weight: ≤ 650 g / piece

▲ jaw opening size: 70mm

▲ short time energizing current: ＞ 100A